Buyer’s guide

How to choose an IT provider for an engineering, architecture or construction firm

A managed service provider runs some or all of your firm’s IT for you. For a firm that designs or builds, the questions that matter go past the help desk: who will know your systems, how design workstations and licenses are handled, and how a handover would work. Here are the criteria and the questions to ask any provider, us included.

Choose an IT provider for a design or construction firm by asking who will know your systems, how design workstations and licenses are handled, where the provider’s job ends and the software vendor’s begins, and how a handover would work.

Managed IT versus fully managed IT

Managed IT means a provider takes ongoing responsibility for agreed IT work. Fully managed IT means that scope covers the day-to-day IT function rather than selected tasks. These are scope descriptions with no standardized definition, so compare the written responsibilities, covered systems and exclusions. For CloudWorks’ service, see the managed IT scope and How We Work for who handles which responsibilities.

Criteria

Eight things to weigh

Weigh each provider against the same list, in writing.

  • Who knows your systems. A named person who owns your account, and the same small team handling your requests.
  • Design workstations. Whether graphics cards, memory and drivers are checked against the software vendor’s published requirements, and updates are planned around your deadlines.
  • Licenses and sign-ins. Who assigns seats, looks after any license server and removes leavers’ access.
  • Where their job ends. A clear line between what the provider supports and what the software vendor supports, and help opening vendor cases.
  • Project files and backup. How large models are shared across offices and sites, what is backed up, and how a restore is tested.
  • Microsoft 365. Who runs sign-ins, devices, sharing with clients and consultants, and the backup of mailboxes and files.
  • Home, site and onsite work. How remote access to design software is set up and tested, and when someone comes onsite.
  • The handover. How they take over from your current provider or in-house person, what they need, and what changes for staff.

Questions to ask

Questions to ask any IT provider

Ask every provider the same questions and compare the answers side by side. These are the points a full answer covers.

Question to askWhat a full answer covers
Who will we deal with day to day?A named contact who learns your firm, and a small team behind them who know your setup.
How do you look after CAD and BIM workstations?Checking cards, memory and drivers against the vendor’s published requirements, and planning updates around deadlines.
What do you support, and what stays with the software vendor?A clear split: the environment around the software on one side, problems inside the application on the other, with help raising vendor cases.
How would our staff work from home or site on design software?A route the software vendor supports, set up with multi-factor sign-in and tested with your own models.
How are our project files backed up, and when was a restore last tested?Separate copies, a named owner for the backup, and test restores of real project folders.
What help is there outside office hours?A plain description of what is available after hours and how to reach it.
What is in the plan, and what is billed separately?A written scope that says what is included, and which items, such as hardware and Microsoft 365 licenses, are billed separately.
How would you take over from our current provider?A written handover outline, what they need from the outgoing provider, and what staff will notice.
When do you come onsite?Which work is scheduled onsite, and how someone comes onsite when it is needed.
Questions to ask an IT provider, and what a full answer covers

How CloudWorks answers these questions

Ask us the same questions you ask anyone else. Here are our answers in short; the call is where we go through them for your firm.

  • Day to day: a named technical account manager and a pod of dedicated technicians who learn your systems. See how we work.
  • Design workstations: we check, set up and maintain them against each vendor’s published requirements. Workstation hardware is quoted separately and confirmed on a short call.
  • Software: we support the environment around it, and the vendor supports problems inside the application. We support the design and project software your firm already runs. Ask about yours. See the software we support.
  • Remote work: a route the software vendor supports, tested with your own models before rollout.
  • Outside office hours: After-hours emergency support is available.
  • The plan: Every plan is tailored to your firm and confirmed on a short call. Microsoft 365 licenses are billed by Microsoft. See what we run for your firm.
  • Onsite: we work remote-first. Project work is scheduled onsite, and we come onsite when it is needed.
  • The handover: a typical 30-day outline, confirmed on the call. See switching IT providers.

Five taps, nothing typed

Find your IT fit in five taps

Tell us about your firm and see what we would look at first. Nothing is saved or sent until you book.

What does your firm do?
How many computers does your team use?
What is the biggest headache right now?
Where to start, by the biggest headache
Where to start, by the biggest headache
If the biggest headache isStart with
Slow or crashing workstationsCAD and BIM workstations
Files and sharingMicrosoft 365 for project-based firms
Sign-ins and licensesMicrosoft 365 for project-based firms
Email and payment fraudPayment-change and email fraud prevention
No one owns ITManaged IT support
Switching providersSwitching IT providers

Questions

Managed service providers: common questions

A managed service provider (MSP) is an outside company that runs some or all of an organization’s IT on an ongoing plan: the help desk, computers, accounts, Microsoft 365, backup and planning, rather than fixing things only when they break. CloudWorks Solutions is a managed service provider for engineering, architecture, construction and manufacturing firms.

They are IT companies that take on the ongoing running of a client’s technology, usually a help desk, device management, Microsoft 365 administration, backup and planning. Some serve every kind of business; some focus on particular kinds of work, such as firms that design, build and make.

Write down what your firm depends on, such as design software, large project files, offices and job sites, and Microsoft 365. Then ask each provider the questions in the table on this page and compare the answers in writing. For a design or construction firm, weigh who will know your systems, how workstations and licenses are handled, where the provider’s job ends and the software vendor’s begins, and how a handover would work.

To get experts you would otherwise have to hire, source and train: help desk, workstation and design software support, Microsoft 365 administration, backup and vendor coordination, from one team. At CloudWorks that team is a named technical account manager and a pod of dedicated technicians, and we find and fix problems before you notice them.

Not every firm does. A provider makes most sense when no one owns IT, when one in-house person carries everything, or when workstations, licenses and Microsoft 365 take time away from project work. If you have an in-house IT person, a provider can work beside them. The IT Fit Finder on this page shows where we would start for a firm like yours.

They should know the environment around it: installs and version changes, sign-ins and licenses, graphics cards and drivers, large files and remote access. Problems inside the application belong to the software vendor’s support, so ask each provider how they split the two and how they help you raise a vendor case.

Next step

Ask us the questions

Book a free 30-minute IT assessment and put the questions in this guide to us. Bring a short picture of your current setup and the software your team runs.

Find your IT fit

Five taps, nothing typed

Find your IT fit in five taps

Tell us about your firm and see what we would look at first. Nothing is saved or sent until you book.

What does your firm do?
How many computers does your team use?
What is the biggest headache right now?
Where to start, by the biggest headache
Where to start, by the biggest headache
If the biggest headache isStart with
Slow or crashing workstationsCAD and BIM workstations
Files and sharingMicrosoft 365 for project-based firms
Sign-ins and licensesMicrosoft 365 for project-based firms
Email and payment fraudPayment-change and email fraud prevention
No one owns ITManaged IT support
Switching providersSwitching IT providers

Ask CloudWorks

One tap

What do you need?

Pick one and we will point you to the page or check that answers it.

Where to go

Each answer points to one page:

What do you need?

Prefer to talk first? Call 1-650-300-7557.

Your privacy choices

The checks on this site run in your browser. Nothing you tap is saved or sent until you book. You can turn optional analytics off for this browser at any time.

When you book or tap our phone number, we also save which pages of this site you read and for how long, with a random browser ID and no name, email address or phone number, so our team can prepare for the call. Turning analytics off here (or sending GPC) stops this and keeps the tool summary out of your booking. We honor the Global Privacy Control (GPC) signal. Details are in our Privacy Policy.